Subscribe:
RSS feed
-
Follow
Following
Already have a WordPress.com account? Log in now.
1. Assign interface to a sensor in AIP-SSM On the AIP-SSM you can configure interfaces for virtual sensors: SA1-AIP-SSM(config-ana-vir)# physical-interface ? GigabitEthernet0/0 GigabitEthernet0/0 physical interface. GigabitEthernet0/1 GigabitEthernet0/1 physical interface. This is only 2 no matter how many interface the ASA has. – GigabitEthernet0/0 can only be Command and Control Interface / Management /. – Alternate […]
November 18, 2010
Both the ASA and the AIP-SSM is able to failover or at a minimum to bypass the traffic. ASA fail-open and fail-close commands is for determening to allow or deny the traffic that has to be analysed with IPS. 1. with the following configuration ==ASA== policy-map outside-policy class outside-class ips inline fail-open ==IPS== ByPass mode […]
itsecworks 
November 18, 2010
0